Błąd formatu e-mail
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
Due to the increase of Mo and V content in the steel, the casting structure in the steel is improved, the grain size is refined, and the carbide morphology is improved. Therefore, the strength and toughness (bending strength, deflection, impact toughness, etc.) of this steel is higher than skd1 and D2, the wear resistance is also increased, and it has a higher resistance to tempering Practice has proved that the service life of this steel die is higher than that of Cr12MoV It often manufactures high demand molds, such as drawing molds, molds for impacting grinding wheel blades, etc.
Produced in Datong, Japan, the heat treatment hardness is higher than skd11 After tempering at high temperature (520-530), it can reach 62-63hrc high hardness, and DC53 exceeds SKD11 in strength and wear resistance The toughness is twice that of SKD11 The toughness of DC53 seldom shows cracks and cracks in cold working die manufacturing The service life is greatly improved Small residual stress Reduce residual stress by turning back at high temperature Because the cracks and deformation after wire cutting are restrained Machinability and abrasiveness exceed SKD11 Used for precision stamping die, cold forging, deep drawing dies, etc.
It is produced by Hitachi in Japan and used for cold forging dies, Slitter, drill bits, reamers, punches, etc.
Made in Sweden, carbide distribution is very uniform, wear resistance, high toughness, easy to process, and heat treatment size stability It is used for punch, deep drawing die, drilling die, milling cutter, shear blade, and other long-life cutting tools.
Made in the United States, it can be operated by an electric erosion Factory pre-hardened hb270-300 Quenching hardness hrc52.
Made in Sweden, especially in electric erosion operation Factory pre-hardened hb290-330 Quenching hardness hrc52.
Made in Datong, Japan, pre-hardened hb370-400 Quenching hardness hrc52.
Made in Sweden, pre-hardened HB < 215 in ex-factory state Quenching hardness hrc52.
For die casting of aluminum, zinc, magnesium, and alloys Hot stamping die, aluminum extrusion die.
The service life of the product made by Hitachi in Japan is significantly longer than that of H13 by electro slag remelting technology Hot stamping die, and aluminum extrusion die.
Made in Sweden, hot stamping die, aluminum extrusion die.
The factory pre-hardening hardness is 338-42hrc, which can be directly engraved without quenching and tempering Used for small-batch mold, simple mold, all kinds of resin products, sliding parts, mold parts with short delivery time Zipper mold, glasses frame mold.
We are a 7 axis milling machine, best desktop milling machine, aluminum for cnc milling exporter supplier wholesaler, our products satisfy our customers. And we want to be your long-term partner, any interests, welcome to contact us.